TM
Patent U.S. # 5317853 / CAN. # 2115722
Insertion Procedure:
For 1/4 Space Balls
Space Balls need a minimum spacing of 5/32” per side. If you cut your stiles and
crossers, as you would normally do for your panel doors......then cut your
panels
5/32" smaller on all sides, this will leave the minimum space for proper
installation and the Space Balls will be able to expand and contract as needed.
Please Note: If you are using a curved bottom dado slot this spacing
must be increased to a minimum of 7/32 ” on all sides
We recommend 2 balls per side ( possibly 3 if the door is very tall or wide).
The
Space Balls will be compressed when the door is assembled and will expand and
compress with the movement of the wood.
It is advisable to keep the humidity
content of the wood under consideration when constructing your doors.
|
|
Flat Bottom Dado:
the panel should be 10 3/16” |
Curved Bottom Dado: the panel should be 8 9/16” |
"DO NOT OVER-COMPRESS"
Questions.............call/text 1-705-544-3450
Copyright © 1997 [
Space Balls]. All rights reserved.
Revised:March 24, 2014.
Privacy Policy